Select Page

Step by Step Guide: How to Make a Pizza Oven in Your Backyard

by | Dec 14, 2023 | How To

Building your own pizza oven in your backyard can be a rewarding and satisfying project. By following these step-by-step instructions, you can create a homemade pizza oven that will allow you to cook delicious, wood-fired pizzas right in your own backyard.

The process involves gathering the necessary materials, creating a sturdy base, arranging the bricks, creating the arch, cementing the bricks in place, adding a concrete outer layer, removing supports and sand, and finally, starting a small fire and cooking your pizzas.

Key Takeaways:

  • Building a pizza oven in your backyard is a rewarding DIY project.
  • Follow step-by-step instructions to ensure a successful outcome.
  • Gather the necessary materials before starting the construction process.
  • Create a sturdy base and arrange the bricks to plan the size and shape of the oven.
  • Cement the bricks in place, add a concrete outer layer, and remove supports and sand.

Materials Needed

Before you start building your own backyard pizza oven, it’s important to gather all the necessary materials. Here’s a list of what you’ll need:

  • Sharp sand
  • Builders sand
  • Cement
  • Aggregate
  • A bucket for the chimney (optional)
  • A spade for mixing
  • A trowel for bricklaying
  • Bricks
  • Large cellophane sheet
  • Old pieces of wood or foam for shaping the arch
  • Chipboard (if building on a pallet)
  • A wooden pallet
  • Drill
  • Wood screws
  • Wood saw

The quantities of these materials will depend on the size of the pizza oven you choose to build. Make sure to have everything ready before you start, so you can work efficiently and smoothly.

Gather all the necessary materials before you start building your backyard pizza oven.

pizza oven construction

Table: Materials Needed for Building a Backyard Pizza Oven

Materials Quantity
Sharp sand 10 bags
Builders sand 5 bags
Cement 15 bags
Aggregate 1 ton
Bucket for chimney 1
Spade for mixing 1
Trowel for bricklaying 1
Bricks 300
Large cellophane sheet 1
Old pieces of wood or foam 10 pieces
Chipboard 1 sheet
Wooden pallet 1
Drill 1
Wood screws 20
Wood saw 1

Be sure to source high-quality materials to ensure the durability and longevity of your pizza oven. Ready now? Let’s move on to the next section and start building the base of your pizza oven.

Creating the Base

Now that you have gathered all the necessary materials, it’s time to start building the base of your homemade outdoor pizza oven. The base is crucial for providing stability and supporting the weight of the oven.

Start by placing a wooden pallet on a flat surface in your backyard. This will serve as the foundation for your pizza oven. Use a chipboard to create a level surface on top of the pallet. This will ensure that the floor of the oven is even and sturdy.

Mix concrete by combining sharp sand, builders sand, cement, and aggregate in the right proportions. Pour the concrete mixture into the wooden mould you created on top of the pallet. Smooth out the surface as much as possible to create a flat base for your pizza oven.

homemade outdoor pizza oven

Gathering Materials for the Base:

Materials Quantity
Wooden pallet 1
Chipboard 1
Sharp sand Depends on the size of the oven
Builders sand Depends on the size of the oven
Cement Depends on the size of the oven
Aggregate Depends on the size of the oven
Bucket 1 (optional for chimney)

Step-by-Step Guide:

  1. Place a wooden pallet on a flat surface in your backyard.
  2. Create a level surface on top of the pallet using a chipboard.
  3. Mix concrete by combining sharp sand, builders sand, cement, and aggregate.
  4. Pour the concrete mixture into the wooden mould on top of the pallet.
  5. Smooth out the surface to create a flat base for your pizza oven.

Arranging the Bricks / Planning Size

Before permanently fixing the bricks in place, it’s important to arrange them in the correct positions to get a sense of the final size and shape of your backyard pizza oven. By doing this, you can ensure that you have enough bricks and get an idea of where they will go.

You can consider chopping standard house bricks in half to add more shape to your oven. This can create a more visually appealing and unique design. Experiment with different arrangements until you find the layout that suits your preferences.

Take your time to plan the size and shape of your pizza oven. Consider the amount of space you have available in your backyard and how many pizzas you want to be able to cook at once. The size of the oven will dictate the number of bricks you will need, so it’s important to plan accordingly.

Remember, the arrangement of the bricks will determine the overall aesthetics and functionality of your homemade pizza oven. So take the time to carefully plan and arrange the bricks to create a backyard pizza oven that meets your needs and preferences.

backyard pizza oven

Table: Brick Arrangement Plan

Layer Brick Placement
Base Layer Cement the bricks together to create a solid foundation.
First Layer Arrange the bricks in a circular pattern, leaving space for the entrance.
Second Layer Continue building the circular shape, gradually angling the bricks inward.
Third Layer Overlap the bricks slightly to create a secure and stable structure.
Final Layer Create a smooth and even surface, ensuring there are no gaps between the bricks.

Creating the Arch

To complete the structure of your homemade pizza oven, it’s time to create the arch. The arch forms the roof of the access area inside the oven and plays a crucial role in providing support for the bricks. Begin by using foam, layered cardboard, or chipboard off-cuts to create a support for the archway bricks while they dry. This support will help maintain the shape and stability of the arch as the cement sets.

Remember, opting for a curved archway rather than a flat one can provide added support as the weight of the bricks wedges them in place.

When building the arch, keep in mind that it should be approximately two-thirds the height of the oven. This proportional size not only ensures stability but also allows for efficient heat distribution and circulation within the oven. Take your time and carefully arrange the bricks to form the arch, making sure they are securely positioned and aligned.

Table: Materials and Steps for Creating the Arch

Materials Steps
Foam, layered cardboard, or chipboard off-cuts 1. Cut the chosen material into appropriate shapes to form the support for the archway.
2. Position the support in place, ensuring it aligns with the desired height and curvature of the arch.
3. Secure the support using temporary fasteners or adhesive to hold it in place as the cement dries.
Bricks 1. Arrange the bricks in an arch shape, starting from one side and working towards the other.
2. Use a trowel and mortar mix to securely cement the bricks in place, ensuring they are properly aligned and leveled.
3. Allow the cement to dry and cure according to the manufacturer’s instructions.

By carefully following these steps and using the right materials, you’ll be able to create a sturdy and aesthetically pleasing arch for your homemade pizza oven. With the arch in place, your pizza oven is now one step closer to completion, bringing you ever closer to enjoying delicious, homemade pizzas in your own backyard.

homemade pizza oven

Cementing the Bricks in Place

Once you have arranged the bricks in the desired position, it’s time to cement them in place to create a sturdy structure for your homemade pizza oven. To ensure a strong and durable construction, it is important to use a fine mix of cement and fine sand for the first layer of bricks.

Before cementing the bricks, create a sand mold of the inside of the oven to support the bricks while they are being cemented. This will help maintain the shape and stability of the oven. Additionally, it is important to cement the chimney in place at this stage, ensuring that it is slightly higher than the door to allow smoke to escape through the chimney.

Layer the bricks one by one, starting from the base and working your way up. Make sure each brick is securely cemented and aligned with the others. The process might require some adjustment and precision to ensure a tight fit. Once the bricks are in place, spread a concrete outer layer over the entire oven for insulation, ensuring that the oven retains heat effectively.

Remember to follow safety precautions when working with cement. Wear protective gloves and a mask to avoid any contact with cement dust. It is advisable to let the cement dry and cure for at least 48 hours before proceeding with the next steps of your DIY pizza oven project.

backyard pizza oven

Removing the Supports and Sand

After the concrete has dried, it’s time to remove the supports for the archway and prepare the oven for its first fire. This step is crucial in ensuring the stability and functionality of your homemade pizza oven. Here’s a step-by-step guide on how to remove the supports and sand from your oven:

Step 1: Remove the Supports

Carefully remove the foam, layered cardboard, or chipboard off-cuts that were used to create support for the archway bricks while they dried. Take your time to avoid damaging the bricks or the structure of the oven. Once the supports are removed, you’ll have full access to the interior of the oven.

Step 2: Clear the Sand

Next, it’s time to remove the sand from inside the oven. Start by gently scooping out the sand using a shovel or your hands. Be careful not to disturb the bricks or the overall structure of the oven. As you remove the sand, check for any remaining pieces of plastic sheeting that may have been used during construction and remove them as well.

Step 3: Clean the Interior

Once all the sand and plastic sheeting have been removed, take a brush or a damp cloth and clean the interior of the oven. Remove any loose debris or dust that may have accumulated during the construction process. This will ensure a clean and ready-to-use oven for your first fire.

With the supports and sand removed, your homemade pizza oven is now ready for its first fire. It’s an exciting milestone in your DIY journey, and soon you’ll be enjoying delicious wood-fired pizzas right in your own backyard!

Creating a Small Fire and Then Cooking Time!

Now that your homemade pizza oven is complete, it’s time to put it to use and start cooking delicious wood-fired pizzas in your own backyard. Creating a small fire is the first step to prepare the oven for cooking. Start by gathering small pieces of dry wood and arrange them in the center of the oven.

Use a lighter or matches to ignite the wood, allowing the fire to catch and slowly build. Keep adding small pieces of wood to maintain the fire and ensure it spreads evenly throughout the oven. As the fire burns, it will begin to heat up the bricks and the inside of the oven, creating the perfect cooking environment for your pizzas.

Once the oven is sufficiently heated, it’s time to start cooking your pizzas. Prepare your pizza dough and toppings while the fire is burning, ensuring everything is ready to go. Use a pizza peel or a flat metal sheet to carefully slide your pizza into the oven, placing it on the hot bricks.

Keep a close eye on your pizza, as the wood-fired oven cooks pizzas at a much faster rate compared to traditional ovens. The high heat will create a crispy crust and perfectly melt the cheese, giving your pizza that authentic wood-fired flavor. Experiment with different toppings, cooking times, and techniques to find your favorite combinations.

Remember to exercise caution when working with fire and a hot oven. Always use oven mitts or heat-resistant gloves when handling the pizza peel or placing your pizzas in the oven. With practice and experience, you’ll soon become a master of homemade wood-fired pizza, impressing family and friends with your culinary skills.

Table 1: Essential Tools for Building a Pizza Oven at Home

Tool Description
Spade Used for mixing concrete and leveling the ground.
Trowel Essential for bricklaying and applying cement.
Drill Required for attaching the chimney and other elements.
Wood Saw Used to cut bricks to the desired size.
Pizza Peel Allows for easy transfer of pizzas into the oven.
Oven Mitts Protective gloves for handling hot surfaces.

Conclusion

Building a pizza oven in your backyard can be a challenging but rewarding project. It allows you to have complete control over the design and functionality of your pizza oven, giving you the opportunity to create delicious, wood-fired pizzas right in your own backyard.

While this DIY approach requires skill and knowledge of construction materials, there are also pizza oven kits available that provide step-by-step instructions and pre-designed materials for a simpler option. Whichever route you choose, the result will be a backyard pizza oven that will bring joy and mouthwatering flavors to your family and friends.

So, why not embark on this exciting adventure and learn how to make a pizza oven in your backyard? From gathering the materials to creating a sturdy base, arranging the bricks, cementing them in place, and finally enjoying the taste of your homemade pizzas, the journey will be as satisfying as the end result. Start your backyard pizza oven project today and elevate your outdoor cooking experience!

FAQ

Is building a pizza oven in my backyard a difficult project?

Building a pizza oven in your backyard can be challenging, but with the right materials and step-by-step instructions, it is achievable for those with some construction knowledge.

What materials do I need to build a pizza oven?

You will need sharp sand, builders sand, cement, aggregate, bricks, a bucket for the chimney (optional), a spade for mixing, a trowel for bricklaying, large cellophane sheet, old pieces of wood or foam for shaping the arch, chipboard (if building on a pallet), a wooden pallet, drill, wood screws, and a wood saw.

How do I create a sturdy base for my pizza oven?

Start by laying a wooden pallet on a flat surface and use chipboard to create a level surface on top of the pallet. Then mix and pour concrete into the wooden mold to create the floor of the pizza oven.

Should I arrange the bricks before cementing them in place?

Yes, it’s a good idea to arrange the bricks in the correct positions before permanently fixing them. This will help you ensure you have enough bricks and get a sense of the final size and shape of the oven.

How do I create the arch for the pizza oven?

You can use foam, layered cardboard, or chipboard off-cuts to create a support for the archway bricks while they dry. The arch is generally about two-thirds the height of the oven.

How do I cement the bricks in place?

Mix a fine mix of cement and fine sand to create the first layer of bricks. Create a sand mold of the inside of the oven to support the bricks while they are cemented in place. Cement the bricks in layers, ensuring the chimney is slightly higher than the door for proper smoke ventilation.

How do I remove the supports and sand from the oven?

Once the concrete has dried, remove the supports for the archway, then carefully remove the sand and any remaining plastic sheeting. This step prepares the oven for its first fire.

What’s the next step after the oven is prepared?

Start by creating a small fire to dry the inside of the oven. Once dry, you can start cooking your pizzas using wood-fired heat.

Can I use pizza oven kits instead of building from scratch?

Yes, if you prefer a simpler option, there are pizza oven kits available that provide step-by-step instructions and pre-designed materials.