Select Page

Quick Guide: How to Remove 2012 Ford Explorer Keypad

by | Dec 4, 2023 | How To

Welcome to our quick guide on how to remove the keypad from your 2012 Ford Explorer. If you’re experiencing issues with the keypad or need to replace it, we’ve got you covered. Follow the step-by-step instructions below to ensure a successful removal and replacement process.

Key Takeaways:

  • Loose driver side B-pillar front door upper molding can cause instability in the keypad.
  • Make sure you have the necessary tools, including front door upper molding retaining clips, 3M adhesive tape, isopropyl alcohol, 1/4″ power tool, 1/4″ ratchet, and a 1/4″ torque wrench.
  • Refer to the Workshop Manual (WSM) Section 501-08 for detailed instructions on removing and reinstalling the front door upper molding.
  • Test the functionality of the keypad after reinstallation to ensure it is securely attached.
  • If you’re not confident in your abilities, it’s best to seek assistance from a trained professional or contact a Ford or Lincoln dealership.

Identifying the Problem

When it comes to the 2012 Ford Explorer keypad, a common issue that many owners may encounter is a loose driver side B-pillar front door upper molding. This can result in an unstable keypad that needs to be addressed. In order to remove and replace the keypad, it is essential to first identify the problem at hand.

The loose driver side B-pillar front door upper molding is the main culprit causing the keypad instability. This molding needs to be securely attached to the door in order for the keypad to function properly. So, before diving into the removal and replacement process, it’s important to pinpoint this specific problem.

By addressing the loose driver side B-pillar front door upper molding, you can ensure that the keypad is stable and functioning as intended. This will provide you with a reliable and convenient keyless entry system for your 2012 Ford Explorer.

Now that you understand the underlying issue with the keypad, it’s time to move on to the next steps in the removal and replacement process. By following the detailed instructions in the upcoming sections, you’ll be able to successfully remove and replace the keypad on your 2012 Ford Explorer.

Gather the Necessary Tools

Before you begin removing the keypad from your 2012 Ford Explorer, it’s important to have the right tools on hand. Here is a list of tools you will need for this DIY guide:

  • Front door upper molding retaining clips
  • 3M adhesive tape
  • Isopropyl alcohol
  • 1/4″ power tool
  • 1/4″ ratchet
  • 1/4″ torque wrench

Having these tools readily available will ensure a smooth and efficient removal process. You can find these tools at your local hardware store or online.

Once you have gathered all the necessary tools, you can proceed with the keypad removal process. Remember to exercise caution and refer to the Workshop Manual (WSM) Section 501-08 for detailed instructions.

DIY guide for removing 2012 Ford Explorer keypad

Table: Tools Required for Keypad Removal

Tool Quantity
Front door upper molding retaining clips 4
3M adhesive tape 4 strips
Isopropyl alcohol 1 bottle
1/4″ power tool 1
1/4″ ratchet 1
1/4″ torque wrench 1

Removing the Front Door Upper Molding

When removing the front door upper molding of your 2012 Ford Explorer to address the keypad issue, it is important to follow the proper steps to avoid any damage. Refer to the Workshop Manual (WSM) Section 501-08 for detailed instructions on removing the molding.

Start by placing the molding on a non-marring surface, ensuring that you have a clear workspace. Carefully remove the two-sided adhesive tape that is holding the molding in place, taking care not to damage the wiring for the keyless entry keypad.

Remember to exercise caution during this process as any mishandling may result in additional repair work and costs. With the front door upper molding removed, you can proceed to the next steps of the keypad removal process.

removing keypad on 2012 ford explorer

Before moving forward, please ensure that you have all the necessary tools and materials for the keypad removal, as mentioned in the previous section. Having everything prepared will make the process smoother and more efficient.

Prepare the Molding for Reinstallation

Before reinstalling the front door upper molding, it is important to properly prepare it to ensure a secure and long-lasting attachment. Follow these steps to prepare the molding for reinstallation on your 2012 Ford Explorer keypad:

  1. Remove and discard the foam ring: Take out the foam ring located on the locator tab of the front door upper molding. This foam ring is no longer needed and can be safely discarded.
  2. Remove the foam strip: On the top of the front door upper molding, you will find a foam strip. Carefully remove this strip, making sure not to damage the molding or the surrounding area.
  3. Clean the molding: Use a damp cotton cloth to clean the front door upper molding. Make sure to remove any dust, dirt, or residue that may have accumulated. This will ensure proper adhesion when reattaching the molding.

Properly preparing the front door upper molding is crucial for a successful reinstallation of the keypad. By removing the foam ring and strip and cleaning the molding, you create a clean and secure surface for attaching the keypad. This will help prevent any future issues with stability or functionality.

Once you have completed these steps, the front door upper molding is ready to be reinstalled on your 2012 Ford Explorer. With a properly prepared molding, you can proceed confidently to the next steps of the keypad removal process.

Table: Steps to Prepare the Front Door Upper Molding

Step Description
1 Remove foam ring
2 Remove foam strip
3 Clean the molding

Replace the Retaining Clips

To continue the process of removing the keypad on your 2012 Ford Explorer, you will need to replace the retaining clips. These clips play a crucial role in securing the front door upper molding, ensuring that the keypad remains stable and properly attached. Follow the steps below to complete this task:

  1. Begin by removing the old retaining clips. Carefully detach them from the front door upper molding, ensuring that no damage is caused to the molding or keypad wiring.
  2. Once the old retaining clips are removed, it’s time to apply new ones. Cut four strips of 3M adhesive tape, each measuring the appropriate length for the designated areas on the molding.
  3. Place one strip of adhesive tape on each side of the molding, ensuring that they are securely positioned in the designated areas.
  4. Apply firm and consistent pressure to ensure proper adhesion of the new retaining clips. This will help keep the front door upper molding in place when the keypad is reinstalled.

By replacing the retaining clips with new adhesive tape, you can ensure that the front door upper molding remains securely attached throughout the keypad removal process. This step is crucial in maintaining a stable and functioning keypad on your Ford Explorer.

Step Action
1 Remove old retaining clips
2 Cut four strips of 3M adhesive tape
3 Place one strip of adhesive tape on each side of the molding
4 Apply firm pressure to ensure proper adhesion

ford explorer keypad removal guide

“Replacing the retaining clips is an essential step in the process of removing the keypad on your 2012 Ford Explorer. By securely attaching the front door upper molding, you can ensure that the keypad remains stable and functional. Take your time and follow the steps carefully to achieve optimal results.”

Clean and Prepare the Door Sheet Metal

Before reinstalling the front door upper molding and keypad, it is crucial to clean and prepare the door sheet metal for optimal adhesion. Follow these steps to ensure a secure and long-lasting installation.

Step 1: Prepare a Cleaning Solution

Mix a 50% solution of water and isopropyl alcohol in a spray bottle or container. This solution will effectively remove any dirt, grease, or residue from the door sheet metal.

Step 2: Protect the Keypad and Rear Door Upper Molding

Before applying the cleaning solution, cover the keyless entry keypad and rear door upper molding with a protective material such as plastic wrap or a cloth. This will prevent any accidental contact with the cleaning solution.

Step 3: Clean the Door Sheet Metal

Using a clean cotton cloth or sponge, moisten it with the water/isopropyl alcohol solution and gently wipe the door sheet metal. Pay close attention to the areas where the front door upper molding and keypad will be attached. Ensure that all dust, dirt, and grime are thoroughly removed.

replacing keypad on 2012 ford explorer

Step 4: Dry the Door Sheet Metal

After cleaning, allow the door sheet metal to air dry completely. Avoid using any additional drying methods such as heat or fans, as they may introduce more contaminants and compromise the adhesive bond.

Step 5: Inspect and Verify Cleanliness

Inspect the door sheet metal to ensure it is free from any residue or debris. Lightly touch the surface to check for any remaining contaminants. If necessary, repeat steps 2 to 4 until the door sheet metal is clean and ready for the reinstallation of the front door upper molding.

By following these steps, you can effectively clean and prepare the door sheet metal for the reinstallation of the front door upper molding. This will ensure a strong and secure bond between the molding and the door, providing stability for the keyless entry keypad.

Reinstall the Front Door Upper Molding

Now that you have prepared the front door upper molding, it’s time to reinstall it securely. Follow these step-by-step instructions to ensure a proper reinstallation:

  1. Carefully align the front door upper molding with the door sheet metal.
  2. Refer to the Workshop Manual (WSM) Section 501-08 for the specific instructions on how to position and attach the molding.
  3. Double-check that the molding is positioned correctly and securely in place.

It is crucial to follow the instructions in the Workshop Manual to ensure the molding is reinstalled properly. Any mistakes or improper alignment can result in the keypad becoming unstable once again.

Remember to handle the front door upper molding with care during the reinstallation process. It is essential not to damage the wiring for the keyless entry keypad or the rear door upper molding.

Steps to Reinstall the Front Door Upper Molding Notes
1. Align the molding with the door sheet metal. Ensure precise alignment for proper installation.
2. Follow the Workshop Manual instructions. Refer to WSM Section 501-08 for specific guidance.
3. Confirm the molding is secure in place. Double-check the positioning for stability.

By reinstalling the front door upper molding correctly, you can ensure that the keypad remains stable and functional. Take your time during this step to ensure proper alignment and attachment.

Ford Explorer Keyless Entry Keypad Removal

Once you have successfully reinstalled the front door upper molding, it is crucial to test the functionality of the keyless entry keypad. This will ensure that the keypad is securely attached to the molding and operating properly. Follow these steps to test the keypad functionality:

  1. Enter the code: Begin by entering your personal code on the keyless entry keypad. Press each button firmly to ensure they are responsive.
  2. Check for door unlock: After entering the code, try opening the front door to verify that the keypad is functioning correctly. Ensure that the door unlocks without any issues.
  3. Test additional functions: Test other functions of the keyless entry keypad, such as locking the doors, opening the trunk, or activating the panic alarm. Make sure that all functions are working as intended.

If you encounter any issues during the testing process, it is possible that the front door upper molding may not be securely attached. In such cases, it is recommended to revisit Section 8 and carefully reinstall the molding following the instructions in the Workshop Manual (WSM) Section 501-08.

By performing a thorough test of the keyless entry keypad functionality, you can ensure the successful removal and replacement of the keypad on your 2012 Ford Explorer. This will allow for convenient and secure access to your vehicle.

Ford Explorer Keyless Entry Keypad Removal

Table: Summary of Steps for Ford Explorer Keyless Entry Keypad Removal

Section Description
Identifying the Problem Understand the issue with the loose front door upper molding causing keypad instability.
Gather the Necessary Tools Ensure you have all the required tools for the keypad removal process.
Removing the Front Door Upper Molding Follow the Workshop Manual (WSM) instructions to remove the molding.
Prepare the Molding for Reinstallation Clean and prepare the molding for proper reinstallation.
Replace the Retaining Clips Remove old clips and apply new adhesive tape strips.
Clean and Prepare the Door Sheet Metal Ensure the door sheet metal is clean and ready for reinstallation.
Reinstall the Front Door Upper Molding Follow the Workshop Manual (WSM) instructions to reinstall the molding securely.
Test the Keypad Functionality Verify that the keypad is functioning correctly after reinstallation.

Additional Considerations

When it comes to removing the keyless entry keypad on your 2012 Ford Explorer, there are a few additional considerations to keep in mind. While this guide provides detailed instructions for the removal process, it is important to note that performing this procedure should be done by trained professionals or individuals with experience working on vehicles.

If you are not confident in your abilities, it is highly recommended to contact a Ford or Lincoln dealership for assistance. They have the knowledge, expertise, and proper tools to ensure the removal is done correctly without causing any damage to your vehicle.

Attempting to remove the keypad without the necessary skills and experience can result in unintended consequences, such as damaging the wiring or other components. It’s always better to seek professional help to avoid any potential issues or costly repairs down the line.

By taking the right precautions and seeking assistance from experts, you can ensure a smooth and successful removal process for your 2012 Ford Explorer’s keyless entry keypad.

Key Takeaways
Removing the keyless entry keypad on your 2012 Ford Explorer should be performed by trained professionals or individuals with experience working on vehicles.
Seek assistance from a Ford or Lincoln dealership if you are not confident in your abilities.
Attempting the removal without proper skills and experience can result in damage to your vehicle’s wiring or other components.
Take the right precautions and seek professional help to avoid any potential issues or costly repairs.

Conclusion

In conclusion, removing and replacing the keypad on your 2012 Ford Explorer is a straightforward process that can be done with the right tools and following the correct steps. By ensuring that the front door upper molding is securely attached, you can prevent any future issues with the keypad’s stability.

Remember to gather all the necessary tools mentioned in Section 3 of this guide and refer to the Workshop Manual (WSM) Section 501-08 for detailed instructions on removing and reinstalling the front door upper molding. Take your time, be careful not to damage any wiring, and clean the molding and door sheet metal properly before reinstallation.

Once everything is in place, test the functionality of the keyless entry keypad by entering a code and opening the door. If you experience any difficulties or are unsure of your abilities, it is best to seek assistance from a trained professional or contact a Ford or Lincoln dealership for further guidance.

FAQ

Can I remove the keypad without removing the front door upper molding?

No, in order to remove the keypad, you need to securely attach the front door upper molding.

What tools do I need to remove the keypad on my 2012 Ford Explorer?

You will need front door upper molding retaining clips, 3M adhesive tape, isopropyl alcohol, 1/4″ power tool, 1/4″ ratchet, and a 1/4″ torque wrench.

How do I remove the front door upper molding?

Refer to the Workshop Manual (WSM) Section 501-08 for detailed instructions on how to remove the front door upper molding.

Do I need to clean the front door upper molding before reinstallation?

Yes, it is important to clean the molding with a damp cotton cloth to remove any dust or dirt.

What should I do with the old retaining clips?

You should remove and discard the old retaining clips before replacing them with new ones.

Can I clean the door sheet metal with any type of solution?

No, use a 50% water/isopropyl alcohol solution to clean the door sheet metal, being careful not to let the solution come into contact with the keypad or the rear door upper molding.

Where can I find the steps to reinstall the front door upper molding?

The detailed instructions for reinstalling the front door upper molding can be found in the Workshop Manual (WSM) Section 501-08.

How can I test the functionality of the keypad after reinstalling?

Test the keypad by entering a code and opening the door to ensure that it is securely attached to the front door upper molding.

Can I perform this procedure myself or should I seek professional help?

This procedure should be performed by trained professionals or individuals with experience working on vehicles. If you are not confident in your abilities, it is recommended to contact a Ford or Lincoln dealership for assistance.

Are there any additional considerations I should keep in mind?

Ensure that the front door upper molding is securely attached to prevent any future issues with the keypad’s stability.