Select Page

Guide: How to Remove Engine Oil Change Soon from 2010 Ford Explorer

by | Dec 4, 2023 | How To

Welcome to our guide on how to remove the engine oil change soon message from your 2010 Ford Explorer. If you’ve been seeing this message on your dashboard and you’re wondering how to get rid of it, we’re here to help. By following the simple steps below, you’ll be able to reset the oil change required light and ensure your Explorer stays in peak condition.

Key Takeaways:

  • Regular oil changes are essential for maintaining the health of your engine
  • Ford recommends oil changes every 7,500 to 10,000 miles or 12 months for the 2010 Explorer
  • The wrench light in a Ford car indicates a powertrain malfunction
  • To reset the oil change required light in your 2006-2010 Ford Explorer, follow the step-by-step instructions provided
  • The recommended oil type for the 2007 Ford Explorer depends on the engine size

Why Regular Oil Changes are Essential for Your Ford Explorer

Regular oil changes are crucial for maintaining the health and longevity of your Ford Explorer’s engine. Not only do oil changes help keep your engine clean, but they also ensure optimal performance and fuel efficiency. Here’s why you need to keep getting those oil changes:

1. Engine Cleanliness

Oil plays a critical role in lubricating the moving parts of your engine and reducing friction. Over time, however, oil can become contaminated with dirt, debris, and engine byproducts, leading to sludge formation. This sludge can clog crucial engine components, impairing performance and potentially causing damage. Regular oil changes help remove this buildup, keeping your engine clean and running smoothly.

2. Prevention of Rust and Corrosion

Engine oil also provides a protective barrier against rust and corrosion. Fresh oil contains additives that create a protective film on engine surfaces, preventing oxidation and corrosion. By changing your oil regularly, you ensure that this protective barrier remains intact, prolonging the life of your engine.

3. Optimization of Oil Life

Oil has a limited lifespan, and its effectiveness diminishes over time. As oil ages, it loses its ability to lubricate, clean, and protect your engine effectively. Regular oil changes ensure that fresh oil with the right viscosity and additives is consistently circulating through your engine, maximizing its performance and extending its life.

By adhering to Ford’s recommended oil change intervals, typically every 7,500 to 10,000 miles or 12 months for the 2010 Explorer, you can keep your engine in top shape, improve fuel efficiency, and avoid costly repairs down the road.

Benefits of Regular Oil Changes
Keeps the engine clean Prevents rust and corrosion
Optimizes oil life Improves fuel efficiency
Enhances engine performance Reduces the risk of costly repairs

Don’t neglect the importance of regular oil changes for your Ford Explorer. Paying attention to your vehicle’s maintenance needs will help ensure that it continues to serve you reliably for years to come.

What does the wrench light mean on a Ford car?

The wrench light in a Ford car, including the Ford Explorer, indicates a powertrain malfunction. When this light appears, it means that the engine control module has detected an issue with the powertrain. It is important to address this issue promptly to prevent further damage to your vehicle.

Using an OBD scan tool, you can check for diagnostic trouble codes (DTCs) to identify the specific problem. These codes provide valuable information about the nature of the malfunction. Common issues that may trigger the wrench light include a faulty throttle position sensor or misfire codes.

If you are not familiar with diagnosing and fixing issues with your car’s powertrain, it is recommended to take your vehicle to a qualified mechanic. They have the knowledge and experience to accurately diagnose and repair the problem. Ignoring a powertrain malfunction can lead to more severe damage and costly repairs in the future.

“The wrench light appearing on your Ford car indicates a powertrain malfunction. It is crucial to address this issue promptly to prevent further damage.”

By addressing powertrain issues promptly, you can ensure the optimal performance and longevity of your Ford Explorer. Regular maintenance and timely repairs are key to keeping your vehicle running smoothly.

DTC Possible Cause
P0121 Faulty throttle position sensor
P0300-P0306 Misfire detected in cylinder 1-6
P2104 Throttle actuator control system – forced idle

How to Reset Oil Change Required Light in Ford Explorer

If you own a 2006-2010 Ford Explorer and need to reset the oil change required light, follow these simple steps:

  1. Start by sitting in the driver’s seat and ensuring that all doors and the hood are closed.
  2. Insert the key into the ignition and turn it to the “on” position without starting the engine.
  3. Locate the “Reset” button on the instrument cluster. It is typically located to the right of the speedometer or on the steering wheel controls.
  4. Press and hold the “Reset” button until the oil change required light begins to flash. This usually takes about 5 seconds.
  5. Release the “Reset” button and immediately press and hold it again for another 5 seconds.
  6. After holding for 5 seconds, release the “Reset” button. The oil change required light should now be reset.
  7. Turn the ignition off and then start the engine to ensure the light no longer appears.

By following these steps, you can easily reset the oil change required light in your 2006-2010 Ford Explorer. Remember to always refer to your vehicle’s owner’s manual for specific instructions related to your model and year.

Proper maintenance, including regular oil changes, is crucial for keeping your Ford Explorer running smoothly. Resetting the oil change required light ensures that you stay on top of your vehicle’s maintenance schedule, helping to prolong engine life and maintain optimal performance.

Table: Oil Change Intervals for 2006-2010 Ford Explorer

Model Year Recommended Oil Change Interval
2006-2010 Every 7,500 to 10,000 miles or 12 months

What oil is used in my Ford Explorer?

If you own a 2007 Ford Explorer, it’s important to use the correct oil type for your engine size. Using the right oil will help optimize your engine’s performance and ensure its longevity. For the 4.0-liter V6 engine in the 2007 Ford Explorer, it is recommended to use 5W-30 synthetic engine oil. Synthetic oil provides enhanced lubrication and can withstand higher temperatures, making it ideal for high-performance engines like the V6 in the Explorer.

On the other hand, if you have the 4.6-liter V8 engine in your 2007 Ford Explorer, the recommended oil type is 5W-20 synthetic motor oil. The V8 engine requires a different oil viscosity to operate at its best. Using the correct oil will help maintain the engine’s efficiency and reduce wear and tear.

To ensure you’re using the right oil, consult your vehicle’s owner’s manual or check with a trusted mechanic. They will be able to provide you with specific information about the oil requirements for your Ford Explorer.

2007 Ford Explorer

Oil Types for 2007 Ford Explorer

Engine Size Recommended Oil Type
4.0-liter V6 5W-30 synthetic engine oil
4.6-liter V8 5W-20 synthetic motor oil

How much oil does a 2008 Explorer take?

When it comes to maintaining your 2008 Ford Explorer, knowing the oil capacity is essential. The oil capacity for the 2008 Explorer depends on the engine size. For the 4.0L V6 engine, the recommended oil capacity is 5 quarts with a filter. On the other hand, for the 4.6L V8 engine, the oil capacity increases to 6 quarts with a filter.

It is crucial to adhere to the recommended oil capacity to ensure proper lubrication and functioning of your engine. Adding too little oil can lead to inadequate lubrication, while adding too much oil can cause excess pressure and potential damage. Always refer to your vehicle’s manual or consult a professional if you are unsure about the correct oil capacity for your 2008 Explorer.

Regular oil changes, with the appropriate amount of oil, are key to maintaining the health and longevity of your engine. By following the manufacturer’s recommendations and keeping up with the maintenance schedule, you can ensure optimal performance and reliability from your 2008 Ford Explorer.

Engine Size Oil Capacity (with Filter)
4.0L V6 5 quarts
4.6L V8 6 quarts

oil capacity 2008 Explorer

Ensuring your 2008 Ford Explorer has the correct amount of oil is crucial for maintaining the performance and longevity of your vehicle. Remember to regularly check your oil level and adhere to the recommended oil capacity for your specific engine size. By doing so, you can keep your Explorer running smoothly and avoid potential engine issues down the road.

How much should an oil change cost?

An oil change is a routine maintenance task that keeps your engine running smoothly and prolongs its lifespan. While the cost of an oil change can vary depending on various factors, such as location and the type of oil used, it’s essential to have a general idea of what you can expect to pay.

On average, the cost of an oil change for a 2010 Ford Explorer ranges from $25 to $50 for a 5-quart oil change. If your vehicle requires 6 quarts of oil, the cost can range from $31 to $63. These prices include the cost of the oil filter, labor, and materials needed for the oil change.

When it comes to labor costs, you can typically expect to pay between $20 and $30 for an oil change. However, keep in mind that labor costs may vary depending on the service provider and location.

It’s important to note that while pricing is an essential consideration, it’s equally crucial to choose a reputable service provider that uses quality products and follows proper procedures. Additionally, maintaining regular oil change intervals according to your vehicle’s manufacturer recommendations will contribute to the overall health and performance of your Ford Explorer.

Component Cost Range
5-Quart Oil Change $25-$50
6-Quart Oil Change $31-$63
Labor Costs $20-$30

How many quarts of transmission fluid do I need?

When it comes to maintaining your 2006 Ford Explorer, knowing the correct volume of transmission fluid is essential. The transmission fluid is responsible for lubricating the transmission system, ensuring smooth gear shifting and preventing friction and heat buildup. To properly fill your transmission system, you will need approximately 11 quarts of transmission fluid

With the right amount of transmission fluid, your Ford Explorer can continue to operate at its best. It is important to use the correct type of transmission fluid recommended by Ford for optimal performance. Using the wrong fluid can potentially cause damage to the transmission system and lead to costly repairs.

Remember to always refer to your vehicle’s owner manual or consult with a professional if you have any doubts about the correct transmission fluid volume or any other maintenance procedures for your 2006 Ford Explorer. Keeping your transmission system properly maintained will help ensure the longevity and reliability of your vehicle.

2006 Ford Explorer

Model Year Transmission Fluid Volume (Quarts)
Ford Explorer 2006 11

What power steering fluid does Ford use?

Ford recommends using Mercon V power steering fluid for the 2006 Ford Explorer’s 4.0-liter and 4.6-liter V8 engines. It is essential to use the correct power steering fluid to ensure optimal performance and protect the power steering system from damage. Mercon V fluid is a high-quality, synthetic fluid that meets Ford’s specifications and provides excellent lubrication and anti-wear properties.

power steering fluid

Why is using the right power steering fluid important?

Using the correct power steering fluid is crucial because different fluids have varying properties and compositions. Power steering systems rely on hydraulic pressure to function properly, and using the wrong fluid can cause damage to the system, leading to leaks, pump failure, or other issues.

Mercon V is specifically formulated to work with Ford power steering systems and provides excellent oxidation stability, shear resistance, and anti-foam properties. Using Mercon V fluid ensures that your power steering system operates smoothly and efficiently, extending its lifespan and reducing the risk of costly repairs.

How much power steering fluid does a 2006 Ford Explorer need?

Fluid Type Quantity
Mercon V Power Steering Fluid Approximately 1 quart

When checking or replenishing the power steering fluid in your 2006 Ford Explorer, it is recommended to use approximately 1 quart of Mercon V fluid. Be sure to check the fluid level regularly and top up as needed to maintain optimal performance and ensure the longevity of your power steering system.

When should the power steering fluid be changed?

Regular maintenance of your Ford Explorer’s power steering fluid is crucial to ensure optimal performance and prevent potential damage. Over time, the power steering fluid can become contaminated with dirt, debris, and moisture, leading to reduced effectiveness and potential system failure. It is recommended to change the power steering fluid in your Ford Explorer according to the manufacturer’s maintenance schedule.

The recommended interval for power steering fluid changes in a Ford Explorer is every 75,000 to 100,000 miles or every two years, whichever comes first. This regular fluid change helps maintain proper lubrication and prevent the buildup of contaminants that can compromise the performance of the power steering system. It is important to consult your vehicle’s owner’s manual for the specific maintenance schedule and interval for your Ford Explorer model.

The cost of power steering fluid can vary depending on the brand and where it is purchased. On average, the cost ranges from $4 to $5 per quart. It is recommended to use a high-quality power steering fluid that meets the specifications outlined in your vehicle’s owner’s manual. Using the correct type and amount of fluid will ensure the longevity and proper functioning of your power steering system.

Regular maintenance of your Ford Explorer’s power steering fluid is a simple and cost-effective way to keep your vehicle running smoothly. By following the manufacturer’s recommended maintenance schedule and using the proper fluid, you can prevent potential issues and maintain optimal performance for years to come.

Table: Power Steering Fluid Change Schedule

Maintenance Schedule Fluid Change Interval
Every 75,000 to 100,000 miles Or every two years

Conclusion

By following the oil change procedure for your Ford Explorer, you can eliminate the engine oil change soon message and maintain optimal engine performance. Regular oil changes are crucial for the health and longevity of your vehicle’s engine. Ensure you use the recommended oil type and capacity for your specific model year.

Resetting the oil change required light is a simple process that can be done using the instrument cluster. Refer to the detailed instructions provided in this guide to reset the light and keep track of your oil life accurately. Remember to perform oil changes at the recommended intervals to prevent engine damage and ensure fuel efficiency.

Overall, taking proper care of your Ford Explorer’s engine is essential for a smooth and reliable driving experience. By following the maintenance schedule and addressing any powertrain malfunctions promptly, you can keep your vehicle running at its best. Always consult your vehicle’s manual or seek professional assistance if you have any doubts or concerns regarding maintenance procedures.

FAQ

Why do I have to keep getting an oil change?

Regular oil changes are essential for maintaining the health of your engine. Oil changes help remove dirt and debris from the engine, preventing rust and reducing the risk of engine damage. Fresh oil also contains additives that prevent oxidation and corrosion, ensuring optimal engine performance and fuel efficiency.

What does the wrench light mean on a Ford car?

The wrench light in a Ford car, including the Ford Explorer, indicates a powertrain malfunction. When this light appears, it means that the engine control module has detected an issue with the powertrain. Using an OBD scan tool, you can check for diagnostic trouble codes to identify the specific problem. Common issues include a faulty throttle position sensor or misfire codes.

How to reset oil change required light in Ford Explorer?

To reset the oil change required light in your 2006-2010 Ford Explorer, follow these steps:

What oil is used in my Ford Explorer?

The recommended oil type for the 2007 Ford Explorer depends on the engine size. For the 4.0-liter V6 engine, 5W-30 synthetic engine oil is suggested. For the 4.6-liter V8 engine, 5W-20 synthetic motor oil is recommended.

How much oil does a 2008 Explorer take?

The 2008 Ford Explorer has a capacity of 5 quarts of oil with a filter for the 4.0L V6 engine, and 6 quarts for the 4.6L V8 engine.

How much should an oil change cost?

The cost of an oil change for a 2010 Ford Explorer can vary depending on the amount of oil needed. For a 5-quart oil change, prices range from $25 to $50, while a 6-quart oil change can range from $31 to $63. Labor costs for an oil change typically range between $20 and $30.

How many quarts of transmission fluid do I need?

The transmission fluid volume for a 2006 Ford Explorer is approximately 11 quarts.

What power steering fluid does Ford use?

Ford recommends using Mercon V power steering fluid for the 2006 Ford Explorer’s 4.0-liter and 4.6-liter V8 engines. Approximately 1 quart of power steering fluid should be used in the car.

When should the power steering fluid be changed?

It is recommended to replace the power steering fluid in your Ford Explorer every 75,000 to 100,000 miles or every two years. The cost of power steering fluid can range from $4 to $5 per quart, depending on the brand and where it is purchased.